Question 1

The initial cost in blow molding is low.

Accepted Answer

A) True 
 B)False

Question 2

What is the maximum pressure required in a transfer molding process?

Accepted Answer

A)  80 mpa
B)  90 mpa
C)  100 mpa
D)  120 mpaE) A) and C)
F) None of the above

Question 3

Which of the following is not an application of blow molding process?

Accepted Answer

A)  toy bodies
B)  door liners
C)  bottles
D)  pipesE) B) and C)
F) A) and B) B

Question 4

Thermosetting materials are the polymeric materials which get soften on heating with or without pressure.

Accepted Answer

A) True 
 B)False

Question 5

Mechanical properties of any plastics are mainly dependent on the temperature, force and time of load applied.

Accepted Answer

A) True 
 B)False

Question 6

What is the minimum pressure required in a compression molding process?

Accepted Answer

A)  0.5 mpa
B)  1 mpa
C)  1.5 mpa
D)  2 mpaE) None of the above
F) B) and D)

Question 7

Polyurethanes plastics can be made in flexible foams even after belonging to thermosetting polymers.

Accepted Answer

A) True 
 B)False

Question 8

There is a varied pressure provided in the solidification unit of injection molding process.

Accepted Answer

A) True 
 B)False

Question 9

Thermosetting plastics like epoxies can be used for filament wound rocket motor casings in missiles by combining with glass fibers.

Accepted Answer

A) True 
 B)False

Question 10

The joints made by an electromagnetic forming process are much stronger than the parent material.

Accepted Answer

A) True 
 B)False  True

Question 11

The heater in the vacuum forming process is heated up to 90°C.

Accepted Answer

A) True 
 B)False  True

Question 12

What is the minimum curing time required in a compression molding process?

Accepted Answer

A)  0.4 minutes
B)  0.5 minutes
C)  0.6 minutes
D)  0.7 minutesE) A) and D)
F) A) and C)

Question 13

Where does the granular molding material get loaded into?

Accepted Answer

A)  barrel
B)  hopper
C)  pellets
D)  splitE) B) and C)
F) All of the above

Exam 12: Polymer Processing Techniques

The initial cost in blow molding is low.

Correct Answer
verified

What is the maximum pressure required in a transfer molding process?

Correct Answer
verified

Which of the following is not an application of blow molding process?

Correct Answer
verified
B

Thermosetting materials are the polymeric materials which get soften on heating with or without pressure.

Correct Answer
verified

Mechanical properties of any plastics are mainly dependent on the temperature, force and time of load applied.

Correct Answer
verified

What is the minimum pressure required in a compression molding process?

Correct Answer
verified

Polyurethanes plastics can be made in flexible foams even after belonging to thermosetting polymers.

Correct Answer
verified

There is a varied pressure provided in the solidification unit of injection molding process.

Correct Answer
verified

Thermosetting plastics like epoxies can be used for filament wound rocket motor casings in missiles by combining with glass fibers.

Correct Answer
verified

The joints made by an electromagnetic forming process are much stronger than the parent material.

Correct Answer
verified
True

The heater in the vacuum forming process is heated up to 90°C.

Correct Answer
verified
True

What is the minimum curing time required in a compression molding process?

Correct Answer
verified

Where does the granular molding material get loaded into?

Correct Answer
verified

Exam 12: Polymer Processing Techniques

The initial cost in blow molding is low.

Correct AnswerverifiedShow Answer

What is the maximum pressure required in a transfer molding process?

Correct AnswerverifiedShow Answer

Which of the following is not an application of blow molding process?

Correct AnswerverifiedB

Thermosetting materials are the polymeric materials which get soften on heating with or without pressure.

Correct AnswerverifiedShow Answer

Mechanical properties of any plastics are mainly dependent on the temperature, force and time of load applied.

Correct AnswerverifiedShow Answer

What is the minimum pressure required in a compression molding process?

Correct AnswerverifiedShow Answer

Polyurethanes plastics can be made in flexible foams even after belonging to thermosetting polymers.

Correct AnswerverifiedShow Answer

There is a varied pressure provided in the solidification unit of injection molding process.

Correct AnswerverifiedShow Answer

Thermosetting plastics like epoxies can be used for filament wound rocket motor casings in missiles by combining with glass fibers.

Correct AnswerverifiedShow Answer

The joints made by an electromagnetic forming process are much stronger than the parent material.

Correct AnswerverifiedTrue

The heater in the vacuum forming process is heated up to 90°C.

Correct AnswerverifiedTrue

What is the minimum curing time required in a compression molding process?

Correct AnswerverifiedShow Answer

Where does the granular molding material get loaded into?

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
True

Correct Answer
verified
True

Correct Answer
verified

Correct Answer
verified